Loctite SF 7387 toughened instant adhesive activator [free design plan]-Materiomart
Loctite SF 7387 toughened instant adhesive activator [free design plan]-Materiomart
Loctite SF 7387 toughened instant adhesive activator [free design plan]-Materiomart

Loctite SF 7387 toughened instant adhesive activator [free design plan]

SKU: LT01219

size:
IDH:
$29.40
$29.40
Shipping calculated at checkout.
Request data sheet

 

Detailed product description

Product Introduction

Loctite SF 7387 is a yellow to amber clear liquid substituted dihydropyridine activator containing solvents n-heptane and isopropyl alcohol. It is designed for use with LOCTITE toughened adhesives to activate the cure of acrylic adhesives. It can also be used with other Loctite acrylic quick-drying glues.

Product technical parameters

Manufacturer Loctite
Product model # Loctite 7387
Manufacturer number 135276
Chemical type Substituted dihydropyridine
Color appearance Transparent yellow to amber liquid
Component Single component
Viscosity 1-2 mPa·s
Flashpoint -4 °C
Proportion 0.78
Spray None

Typical performance
Using LOCTITE SF 7387 The set time and cure speed achieved depend on the adhesive used, the substrates being bonded, surface cleanliness and whether one or two surfactants are used.

Related reading

Before you specify it

Technical writing from our engineering team and from the manufacturers we carry.

Knowledge Hub
What Is Instant Adhesive? A Technical Deep Dive into Cyanoacrylate Adhesives

Knowledge Hub · 2026-06-27

What Is Instant Adhesive? A Technical Deep Dive into Cyanoacrylate Adhesives

Read The Whitening Phenomenon of Instant Adhesives: Causes and Prevention

Knowledge Hub · 2026-06-27

The Whitening Phenomenon of Instant Adhesives: Causes and Prevention

Read What Are Quick Drying Adhesives? The Complete Guide to Instant Bonding

Knowledge Hub · 2026-04-09

What Are Quick Drying Adhesives? The Complete Guide to Instant Bonding

Read

What you get with the material

We are not just shipping you a drum

A grade on its own rarely solves the problem. These are the four things we do around it.

Selection support

Tell us the substrates, the process window and the failure you are trying to avoid. We narrow the field before you order anything.

Process design

Prototyping and pilot runs

Bonded samples and pilot batches of 200–500 pcs on our own dispensing and curing equipment, so process questions are answered before mass production.

Prototyping & pilot

Cross-border supply, DDP

Destination clearance, local labelling and destination-language SDS are set up by us. Class-restricted goods are routed at quotation time, not discovered at the border.

Cross-border supply

Documentation chain

Which document, issued by whom, covering what, and notification when it changes. We pass manufacturer documentation through unchanged.

Material substitution

Common questions

Before you send the enquiry

Yes. Tell us the grade and how you intend to use it, and we will send the manufacturer’s current technical data sheet. We pass manufacturer documentation through unchanged rather than reissuing it under our own name.

No — and you should be careful with anyone in our position who says they do. What we supply is the document chain: which document exists, who issued it, what it covers, and notification when it changes. Compliance statements come from the manufacturer, not from us.

That is one of the most common reasons engineers contact us. Equivalence is a ladder, not a yes/no answer — some claims are backed by a matching data sheet, others only by chemistry family. We will tell you which rung a given substitution sits on before you commit to it.

Packaging sizes shown on this page are the standard units for this grade. Sample quantities for evaluation are handled case by case — tell us the trial you are planning and we will scope it with you.

Tell us what you are bonding

Substrates, process window, and the failure you are trying to design out. An engineer answers, not a form.

Talk to an engineer Browse all products

We do not issue compliance certificates. We supply the material, the manufacturer’s documentation, and the engineering judgement in between.