TONSAN TS828 High Performance Acrylic Structural Adhesive Dark Green

Title:
$0.00
$0.00
Shipping calculated at checkout.

This grade is quoted against your application and packaging size. Send us the substrates and volumes and we will come back with pricing and the current data sheet.

Request a quote Request data sheet

Detailed product description

Product Introduction

Tianshan TONSAN® TS828 is a dark green, two-component, volume ratio 10:1, fast curing in 5 minutes, and can reach 80% final strength in 20 minutes, high-performance acrylic structural adhesive. After curing, the strength is high, and the adhesive is It has good layer toughness and peeling resistance, high thermal aging strength, and a wide range of bonding base materials. It is suitable for self-adhesion and mutual adhesion of various materials such as metal, plastic, fiberglass, etc.

Product Application

TONSAN® structural bonding series products, the operation process is simple, no special equipment is required, the bonding strength is high, peeling resistance, impact resistance, applicable to a wide range of materials, can be used for metal, ceramics, plastics, wood, etc. or bonding between different materials.

Tianshan TS828 performance introduction

      1. High bonding strength
      2. The stress on the bonding surface is evenly distributed, and there is no thermal impact or deformation on the parts
      3. Fast curing speed, improved work efficiency&nbsp ;
      4. Widely used to bond different materials

Product Specifications

< td style="width: 47.7077%; height: 22px;">Two-component < td style ="width: 47.7077%; height: 22px;">-60 to +150°C < /table>

 

Manufacturer Tianshan TONSAN® 
Product model TS828
Curing method Room temperature curing
Single component/two components
Color appearance Dark Green
Density proportion@23°C  1.00 g/cm3
Volume ratio (A : B) 10 : 1
Operating time 20g mixing 4-6 min
Tensile strength  36.0 MPa
Shear strength 32.0 MPa
Peel Strength 82.0 N/cm
Cure shrinkage 0.01 cm/cm
< span style ="font-size: 14px;">Cure time required for light loads 0.3 h
Full load curing time< /span> 24 h
Available temperature range

Spec // as published by the manufacturer

At a glance

Product type
Structural Adhesive
Brand
TONSAN
Chemistry
Silicone
Cure mechanism
Moisture Curing
Viscosity band
10000+

Substrates in scope

CeramicGlassMetalSynthetic Rubber

Performance focus

Moisture ResistanceHigh Temperature ResistanceLow Temperature ResistanceWater Resistance

Declared by manufacturer

RoHSREACH

Values are as published by the manufacturer for this grade. They describe the product family, not a test report for your assembly — ask us for the current data sheet before you design against them.

Related reading

Before you specify it

Technical writing from our engineering team and from the manufacturers we carry.

Knowledge Hub

Knowledge Hub · 2026-08-07

How Does HMPUR Adhesive Work in TWS Earbud Assembly?

Read Self-healing polyurethane coating doubles corrosion resistance

Knowledge Hub · 2026-06-27

Self-healing polyurethane coating doubles corrosion resistance

Read What Is MS-Epoxy Hybrid Adhesive? The Dual-Cure Solution to NEV Battery Manufacturing's Toughest Challenge

Knowledge Hub · 2026-06-27

What Is MS-Epoxy Hybrid Adhesive? The Dual-Cure Solution to NEV Battery Manufacturing's Toughest Challenge

Read

What you get with the material

We are not just shipping you a drum

A grade on its own rarely solves the problem. These are the four things we do around it.

Selection support

Tell us the substrates, the process window and the failure you are trying to avoid. We narrow the field before you order anything.

Process design

Prototyping and pilot runs

Bonded samples and pilot batches of 200–500 pcs on our own dispensing and curing equipment, so process questions are answered before mass production.

Prototyping & pilot

Cross-border supply, DDP

Destination clearance, local labelling and destination-language SDS are set up by us. Class-restricted goods are routed at quotation time, not discovered at the border.

Cross-border supply

Documentation chain

Which document, issued by whom, covering what, and notification when it changes. We pass manufacturer documentation through unchanged.

Material substitution

Common questions

Before you send the enquiry

Yes. Tell us the grade and how you intend to use it, and we will send the manufacturer’s current technical data sheet. We pass manufacturer documentation through unchanged rather than reissuing it under our own name.

No — and you should be careful with anyone in our position who says they do. What we supply is the document chain: which document exists, who issued it, what it covers, and notification when it changes. Compliance statements come from the manufacturer, not from us.

That is one of the most common reasons engineers contact us. Equivalence is a ladder, not a yes/no answer — some claims are backed by a matching data sheet, others only by chemistry family. We will tell you which rung a given substitution sits on before you commit to it.

Packaging sizes shown on this page are the standard units for this grade. Sample quantities for evaluation are handled case by case — tell us the trial you are planning and we will scope it with you.

Tell us what you are bonding

Substrates, process window, and the failure you are trying to design out. An engineer answers, not a form.

Talk to an engineer Browse all products

We do not issue compliance certificates. We supply the material, the manufacturer’s documentation, and the engineering judgement in between.