TONSAN TS316 anti-wear coating dark gray

Title:
$0.00
$0.00
Shipping calculated at checkout.

This grade is quoted against your application and packaging size. Send us the substrates and volumes and we will come back with pricing and the current data sheet.

Request a quote Request data sheet

Detailed product description

Product Introduction

Tianshan TONSAN TS316 is a two-component product with medium viscosity, no flow on the vertical surface, and excellent wear resistance. It is suitable for the preparation of machine tool guide rails, hydraulic cylinder blocks, piston rods, bushings, and bearing seat support surfaces by the copy molding method. anti-friction coating.

Product Application

Tianshan TONSAN® anti-friction coating and positioning potting series products are polymer alloy composite materials with high-performance anti-friction materials as the main materials. They are used in the coating production of equipment sliding mating surfaces and various mating surfaces. Positioning and potting between.

Tianshan TS316 performance introduction

       1. Increase the contact area between the guide rail surface and the base body

       2. Contains special materials, self-coating Excellent lubrication performance

       3. Excellent anti-crawling performance

    &nbsp ;  4. High bonding strength with metal 

       5. High impact resistance

       6. Low shrinkage

       7. Comply with JB/T3578-2007 "Sliding Guide Rails" General Technical Principles of Epoxy Coating Materials闁?/span>

       8. Comply with JB/T3579-2007 "General Technical Conditions for Epoxy Coated Sliding Guides"< /span>

       9. Comply with JB/T11566-2013 "Positioning Glue for Machine Tools"

Product Specifications

< /tr> < td style="width: 47.7077%; height: 22px;">Single component/dual component < td style="width: 47.7077%; height: 22px;">Weight ratio (A: B) < td style="width: 47.7077%; height: 22px;">Operating time 50g mixing
Manufacturer< /span> Tianshan TONSAN® 
Product model < /td> TS316
Curing method Room temperature curing
Two-component
Color appearance Dark gray
Density ratio@23°C  1.53 g/cm3
6 : 1
50-70 min
Compressive strength 98 MPa
Shear strength 20 MPa
Hardness (Shore D) 81
Friction coefficient 0.032 span>
Wear mark width 1.80 mm< /td >
Wear rate 1.42×10-8 mm 3/N · m
Cure time required before molding or machining 24 h
Available temperature range -60 to +120°C

 

Spec // as published by the manufacturer

At a glance

Product type
Insulating Coating
Brand
TONSAN
Chemistry
Silicone
Cure mechanism
Moisture Curing
Viscosity band
10000+

Substrates in scope

CeramicGlassMetalSynthetic Rubber

Performance focus

Moisture ResistanceHigh Temperature ResistanceLow Temperature ResistanceWater Resistance

Declared by manufacturer

RoHSREACH

Values are as published by the manufacturer for this grade. They describe the product family, not a test report for your assembly — ask us for the current data sheet before you design against them.

Related reading

Before you specify it

Technical writing from our engineering team and from the manufacturers we carry.

Knowledge Hub

Knowledge Hub · 2026-08-07

How Does HMPUR Adhesive Work in TWS Earbud Assembly?

Read Solving the Sealing Dilemma in Fluid Machinery: How Liquid Gasket Technology Tackles the Ultimate Challenges of High Pressure, High Temperature, and Vibration

Knowledge Hub · 2026-06-27

Solving the Sealing Dilemma in Fluid Machinery: How Liquid Gasket Technology Tackles the Ultimate Challenges of High Pressure, High Temperature, and Vibration

Read Global Data Center Challenges: Dow TC-3120 High-Performance Thermal Gel Breaks Global Bottlenecks (For AI & Big Data Era)

Knowledge Hub · 2026-06-27

Global Data Center Challenges: Dow TC-3120 High-Performance Thermal Gel Breaks Global Bottlenecks (For AI & Big Data Era)

Read

What you get with the material

We are not just shipping you a drum

A grade on its own rarely solves the problem. These are the four things we do around it.

Selection support

Tell us the substrates, the process window and the failure you are trying to avoid. We narrow the field before you order anything.

Process design

Prototyping and pilot runs

Bonded samples and pilot batches of 200–500 pcs on our own dispensing and curing equipment, so process questions are answered before mass production.

Prototyping & pilot

Cross-border supply, DDP

Destination clearance, local labelling and destination-language SDS are set up by us. Class-restricted goods are routed at quotation time, not discovered at the border.

Cross-border supply

Documentation chain

Which document, issued by whom, covering what, and notification when it changes. We pass manufacturer documentation through unchanged.

Material substitution

Common questions

Before you send the enquiry

Yes. Tell us the grade and how you intend to use it, and we will send the manufacturer’s current technical data sheet. We pass manufacturer documentation through unchanged rather than reissuing it under our own name.

No — and you should be careful with anyone in our position who says they do. What we supply is the document chain: which document exists, who issued it, what it covers, and notification when it changes. Compliance statements come from the manufacturer, not from us.

That is one of the most common reasons engineers contact us. Equivalence is a ladder, not a yes/no answer — some claims are backed by a matching data sheet, others only by chemistry family. We will tell you which rung a given substitution sits on before you commit to it.

Packaging sizes shown on this page are the standard units for this grade. Sample quantities for evaluation are handled case by case — tell us the trial you are planning and we will scope it with you.

Tell us what you are bonding

Substrates, process window, and the failure you are trying to design out. An engineer answers, not a form.

Talk to an engineer Browse all products

We do not issue compliance certificates. We supply the material, the manufacturer’s documentation, and the engineering judgement in between.