TONSAN 1510 Anaerobic Flat Sealant Pink
- Regular price
- $0.00
- Sale price
- $0.00
- Regular price
-
This grade is quoted against your application and packaging size. Send us the substrates and volumes and we will come back with pricing and the current data sheet.
Detailed product description
Product Introduction
Tianshan TONSAN® 1510 anaerobic flat sealant is a pink color with high temperature resistance and good media resistance. After curing, it becomes a rigid adhesive layer, used for sealing rigid flanges, end covers or gasket coatings.
Product Application
TONSAN® anaerobic flat seal series products are used for small gap flat sealing of mechanical parts, such as boxes, flanges, end cover joint surfaces, etc. Replaces gaskets to improve sealing reliability, increase overall rigidity and load-bearing capacity. It can also be applied to solid gaskets to improve the sealing effect.
Tianshan 1510 performance introduction
1. Single component, no solvent, room temperature curing
2. 100% fill the plane gap
3. Suitable for flat seals with gaps less than 0.25mm
4. High strength and strong sealing ability span >
5. Oil-resistant, medium-resistant, vibration-resistant, and aging-resistant
6. No corrosion to the workpiece
7. Comply with JB/T7311-2008 "Technical Specifications for the Application of Anaerobic Adhesives, Silicone Rubber and Pre-coated Dry Film Adhesives for Engineering Machinery"
Product Specifications
| Manufacturer | Tianshan TONSAN® |
| Product model | 1510 |
| Curing method | Room temperature curing |
| Single component/two components | Single component |
| Color appearance | Pink |
| Density specific gravity@23°C | 1.10 g/cm3 |
| Viscosity | 5.0×105 mPa·s td> |
| Maximum sealing gap | 0.25mm |
| Maximum sealing pressure | 36 MPa |
| Initial solidification time | 2-3h |
| Full solid time | 24h |
| Available temperature range | -60 to +204°C |
Spec // as published by the manufacturer
At a glance
- Product type
- Sealant
- Brand
- TONSAN
- Chemistry
- Silicone
- Cure mechanism
- Moisture Curing
- Viscosity band
- 10000+
Declared by manufacturer
Values are as published by the manufacturer for this grade. They describe the product family, not a test report for your assembly — ask us for the current data sheet before you design against them.
Same family
More in Sealants
Grades we carry in the same category. Engineers most often arrive here looking for an alternative to something they already use.
Loctite MS930GY™ Multi-purpose one-component silane modified polymer sealant gray
Moisture Curing
View grade
Loctite 207 general-purpose one-component silicone sealant
Silicone
View grade
Loctite 5140 one-component silicone sealant
Silicone
View grade
Loctite 5404 thermally conductive one-component silicone sealant
Loctite®
View gradeRelated reading
Before you specify it
Technical writing from our engineering team and from the manufacturers we carry.
Knowledge Hub · 2026-06-27
Solving the Sealing Dilemma in Fluid Machinery: How Liquid Gasket Technology Tackles the Ultimate Challenges of High Pressure, High Temperature, and Vibration
Read
Knowledge Hub · 2026-06-27
Sealing Hydrogen Systems: How LOCTITE® Anaerobic Sealants Deliver Leak-Free Performance Under Pressure
Read
Knowledge Hub · 2026-06-27
Top 10 Uses of Adhesives and Sealants in Automotive, Construction and Aerospace
ReadWhat you get with the material
We are not just shipping you a drum
A grade on its own rarely solves the problem. These are the four things we do around it.
Selection support
Tell us the substrates, the process window and the failure you are trying to avoid. We narrow the field before you order anything.
Process designPrototyping and pilot runs
Bonded samples and pilot batches of 200–500 pcs on our own dispensing and curing equipment, so process questions are answered before mass production.
Prototyping & pilotCross-border supply, DDP
Destination clearance, local labelling and destination-language SDS are set up by us. Class-restricted goods are routed at quotation time, not discovered at the border.
Cross-border supplyDocumentation chain
Which document, issued by whom, covering what, and notification when it changes. We pass manufacturer documentation through unchanged.
Material substitutionCommon questions
Before you send the enquiry
Yes. Tell us the grade and how you intend to use it, and we will send the manufacturer’s current technical data sheet. We pass manufacturer documentation through unchanged rather than reissuing it under our own name.
No — and you should be careful with anyone in our position who says they do. What we supply is the document chain: which document exists, who issued it, what it covers, and notification when it changes. Compliance statements come from the manufacturer, not from us.
That is one of the most common reasons engineers contact us. Equivalence is a ladder, not a yes/no answer — some claims are backed by a matching data sheet, others only by chemistry family. We will tell you which rung a given substitution sits on before you commit to it.
Packaging sizes shown on this page are the standard units for this grade. Sample quantities for evaluation are handled case by case — tell us the trial you are planning and we will scope it with you.
Tell us what you are bonding
Substrates, process window, and the failure you are trying to design out. An engineer answers, not a form.
We do not issue compliance certificates. We supply the material, the manufacturer’s documentation, and the engineering judgement in between.