Dolph’s SYNTHITE AC-46 High Temperature Resistant Electronic Coating Clear-Materiomart
Dolph’s SYNTHITE AC-46 High Temperature Resistant Electronic Coating Clear-Materiomart

Dolph’s SYNTHITE AC-46 High Temperature Resistant Electronic Coating Clear

SKU: 198422

Size:
$752.64
$752.64
Shipping calculated at checkout.
Request data sheet

 

Detailed product description

Product Introduction

Dolph‘s SYNTHITE® AC-46 can be brushed, dipped or sprayed. It is used as is in many applications or can be diluted to T-200X as needed. For spray applications, a 20 - 25% dilution is typical. Film thickness should be maintained to no more than 1.5 mil per application. This allows for complete solvent release and proper treatment. SYNTHITE® AC-46 will air dry for processing within 30 minutes. For best chemical and abrasion resistance, allow to air dry for at least 24 hours.

Manufacturer Loctite
Product model # SYNTHITE AC-46
Manufacturer number 0816025
Curing method Room temperature curing
Color appearance Transparent
Cure time 30 mins
Flashpoint 27℃
Dielectric strength 1800 V/mil
Density 7.4-7.8
Viscosity 130-270 cps
Working hours 155℃

 

 

 

Related reading

Before you specify it

Technical writing from our engineering team and from the manufacturers we carry.

Knowledge Hub
Solving the Sealing Dilemma in Fluid Machinery: How Liquid Gasket Technology Tackles the Ultimate Challenges of High Pressure, High Temperature, and Vibration

Knowledge Hub · 2026-06-27

Solving the Sealing Dilemma in Fluid Machinery: How Liquid Gasket Technology Tackles the Ultimate Challenges of High Pressure, High Temperature, and Vibration

Read Which Loctite is the Strongest? A Guide to Choosing the Right Adhesive

Knowledge Hub · 2026-06-27

Which Loctite is the Strongest? A Guide to Choosing the Right Adhesive

Read Why Do Industrial Adhesives Fail Easily While Others Support Heavy-Duty Loads of Hundreds of Tons

Knowledge Hub · 2026-06-27

Why Do Industrial Adhesives Fail Easily While Others Support Heavy-Duty Loads of Hundreds of Tons

Read

What you get with the material

We are not just shipping you a drum

A grade on its own rarely solves the problem. These are the four things we do around it.

Selection support

Tell us the substrates, the process window and the failure you are trying to avoid. We narrow the field before you order anything.

Process design

Prototyping and pilot runs

Bonded samples and pilot batches of 200–500 pcs on our own dispensing and curing equipment, so process questions are answered before mass production.

Prototyping & pilot

Cross-border supply, DDP

Destination clearance, local labelling and destination-language SDS are set up by us. Class-restricted goods are routed at quotation time, not discovered at the border.

Cross-border supply

Documentation chain

Which document, issued by whom, covering what, and notification when it changes. We pass manufacturer documentation through unchanged.

Material substitution

Common questions

Before you send the enquiry

Yes. Tell us the grade and how you intend to use it, and we will send the manufacturer’s current technical data sheet. We pass manufacturer documentation through unchanged rather than reissuing it under our own name.

No — and you should be careful with anyone in our position who says they do. What we supply is the document chain: which document exists, who issued it, what it covers, and notification when it changes. Compliance statements come from the manufacturer, not from us.

That is one of the most common reasons engineers contact us. Equivalence is a ladder, not a yes/no answer — some claims are backed by a matching data sheet, others only by chemistry family. We will tell you which rung a given substitution sits on before you commit to it.

Packaging sizes shown on this page are the standard units for this grade. Sample quantities for evaluation are handled case by case — tell us the trial you are planning and we will scope it with you.

Tell us what you are bonding

Substrates, process window, and the failure you are trying to design out. An engineer answers, not a form.

Talk to an engineer Browse all products

We do not issue compliance certificates. We supply the material, the manufacturer’s documentation, and the engineering judgement in between.