![Loctite TEROSON MS 930 one-component modified silane sealant [free design plan]-Materiomart](http://www.assembtek.com/cdn/shop/files/8f6a39266ac84dfa97f5c63a2252216a.webp?v=1766665552&width=1946)
![Loctite TEROSON MS 930 one-component modified silane sealant [free design plan]-Materiomart](http://www.assembtek.com/cdn/shop/files/8f6a39266ac84dfa97f5c63a2252216a.webp?v=1766665552&width=800)
Loctite TEROSON MS 930 one-component modified silane sealant [free design plan]
SKU: LT01233
- Regular price
- $19.60
- Sale price
- $19.60
- Regular price
-
Detailed product description
Product Introduction
Loctite MS930 is a gun-grade one-component sealant based on a silane-modified polymer that cures by reaction Soft and elastic product with moisture. The formation and curing time of the skin depends on humidity and temperature, and the curing time also depends on the seam depth. This can be reduced by increasing the temperature and humidity during these times; low temperatures and low humidity will slow down the process. TEROSON MS 930 is free of solvents, isocyanates, silicones and polyvinyl chloride. It exhibits good adhesion to many substrates and is compatible with suitable paint systems. The sealant also exhibits good UV resistance, so it can be used in both interior and exterior applications. Trosen MS 930 allows accelerated curing as a two-component material. See separate data sheet Teroson MS Power and Speed Technology or Teroson MS 2c-Technology.
Product technical parameters
| Manufacturer | Loctite |
| Product model # | Loctite MS930 |
| Manufacturer number | 233530 |
| Color appearance | White |
| Component | Single component |
| Curing method | Moisture curing |
| Elongation at break | 250% |
| Hardness | 30 A |
| Tensile strength | 0.9 MPa |
| Proportion | 1.5 @ 25°C |
| Application temperature | -50 to 80 ℃ |
![Loctite TEROSON MS 930 one-component modified silane sealant [free design plan]-Materiomart](http://www.assembtek.com/cdn/shop/files/8f6a39266ac84dfa97f5c63a2252216a.webp?v=1766665552&width=3277)
Spec // as published by the manufacturer
At a glance
- Product type
- Sealant
- Brand
- Loctite®
- Cure mechanism
- Moisture Curing
Substrates in scope
Values are as published by the manufacturer for this grade. They describe the product family, not a test report for your assembly — ask us for the current data sheet before you design against them.
Same family
More in Sealants
Grades we carry in the same category. Engineers most often arrive here looking for an alternative to something they already use.
Loctite 596 high temperature resistant one-component silicone sealant
Silicone
View grade
Loctite MS 5570 WH high viscosity elastic joint sealant white
Loctite®
View grade![Loctite SF 790 Gasket Cleaner [Free Design Plan]-Materiomart](http://www.assembtek.com/cdn/shop/files/639efd3ce51144129d7b8499ea4a1d2a.jpg?v=1766665549&width=800)
Loctite SF 790 Gasket Cleaner [Free Design Plan]
Loctite®
View grade![Loctite SI 5039 UV-cured high-strength rubber gasket sealant [free design plan]-Materiomart](http://www.assembtek.com/cdn/shop/files/05eca984ec88457eb3489186218c5a89.webp?v=1766665550&width=800)
Loctite SI 5039 UV-cured high-strength rubber gasket sealant [free design plan]
UV Curing
View gradeRelated reading
Before you specify it
Technical writing from our engineering team and from the manufacturers we carry.
Knowledge Hub · 2026-06-27
Solving the Sealing Dilemma in Fluid Machinery: How Liquid Gasket Technology Tackles the Ultimate Challenges of High Pressure, High Temperature, and Vibration
Read
Knowledge Hub · 2026-06-27
Sealing Hydrogen Systems: How LOCTITE® Anaerobic Sealants Deliver Leak-Free Performance Under Pressure
Read
Knowledge Hub · 2026-06-27
Top 10 Uses of Adhesives and Sealants in Automotive, Construction and Aerospace
ReadWhat you get with the material
We are not just shipping you a drum
A grade on its own rarely solves the problem. These are the four things we do around it.
Selection support
Tell us the substrates, the process window and the failure you are trying to avoid. We narrow the field before you order anything.
Process designPrototyping and pilot runs
Bonded samples and pilot batches of 200–500 pcs on our own dispensing and curing equipment, so process questions are answered before mass production.
Prototyping & pilotCross-border supply, DDP
Destination clearance, local labelling and destination-language SDS are set up by us. Class-restricted goods are routed at quotation time, not discovered at the border.
Cross-border supplyDocumentation chain
Which document, issued by whom, covering what, and notification when it changes. We pass manufacturer documentation through unchanged.
Material substitutionCommon questions
Before you send the enquiry
Yes. Tell us the grade and how you intend to use it, and we will send the manufacturer’s current technical data sheet. We pass manufacturer documentation through unchanged rather than reissuing it under our own name.
No — and you should be careful with anyone in our position who says they do. What we supply is the document chain: which document exists, who issued it, what it covers, and notification when it changes. Compliance statements come from the manufacturer, not from us.
That is one of the most common reasons engineers contact us. Equivalence is a ladder, not a yes/no answer — some claims are backed by a matching data sheet, others only by chemistry family. We will tell you which rung a given substitution sits on before you commit to it.
Packaging sizes shown on this page are the standard units for this grade. Sample quantities for evaluation are handled case by case — tell us the trial you are planning and we will scope it with you.
Tell us what you are bonding
Substrates, process window, and the failure you are trying to design out. An engineer answers, not a form.
We do not issue compliance certificates. We supply the material, the manufacturer’s documentation, and the engineering judgement in between.