Loctite 412 low viscosity temporary adhesive instant adhesive
SKU: LT01102
- Regular price
- $33.60
- Sale price
- $33.60
- Regular price
-
Low viscosity, plasticized ethyl cyanoacrylate adhesive designed for temporary bonding applications on metal and glass.
LOCTITE 412 is a colorless, clear, low viscosity, plasticized ethyl cyanoacrylate adhesive designed for temporary bonding applications on metal and glass. This is a high strength product suitable for applications where maximum adhesion is required. Bonded parts can be separated by immersion in a detergent solution, heat, or impact (in some cases).
Designed for temporary bonding applications on metal and glass
high strength
low viscosity
Plasticization
For use where maximum adhesion is required
The adhesive part is detachable
Same family
More in Instant Adhesives
Grades we carry in the same category. Engineers most often arrive here looking for an alternative to something they already use.
Loctite 4304 Medical Grade UV Curing Instant Adhesive Transparent
Epoxy Resin · UV Curing
View grade
Loctite 4305 Medical Grade UV Curing Instant Adhesive Transparent
UV Curing
View grade
Loctite 4306 Medical Grade UV Curing Instant Adhesive Transparent
UV Curing
View grade
Loctite 4307 Medical Grade UV Curing Instant Adhesive Transparent
UV Curing
View gradeRelated reading
Before you specify it
Technical writing from our engineering team and from the manufacturers we carry.
Knowledge Hub · 2026-06-27
What Is Instant Adhesive? A Technical Deep Dive into Cyanoacrylate Adhesives
Read
Knowledge Hub · 2026-06-27
The Whitening Phenomenon of Instant Adhesives: Causes and Prevention
Read
Knowledge Hub · 2026-04-09
What Are Quick Drying Adhesives? The Complete Guide to Instant Bonding
ReadWhat you get with the material
We are not just shipping you a drum
A grade on its own rarely solves the problem. These are the four things we do around it.
Selection support
Tell us the substrates, the process window and the failure you are trying to avoid. We narrow the field before you order anything.
Process designPrototyping and pilot runs
Bonded samples and pilot batches of 200–500 pcs on our own dispensing and curing equipment, so process questions are answered before mass production.
Prototyping & pilotCross-border supply, DDP
Destination clearance, local labelling and destination-language SDS are set up by us. Class-restricted goods are routed at quotation time, not discovered at the border.
Cross-border supplyDocumentation chain
Which document, issued by whom, covering what, and notification when it changes. We pass manufacturer documentation through unchanged.
Material substitutionCommon questions
Before you send the enquiry
Yes. Tell us the grade and how you intend to use it, and we will send the manufacturer’s current technical data sheet. We pass manufacturer documentation through unchanged rather than reissuing it under our own name.
No — and you should be careful with anyone in our position who says they do. What we supply is the document chain: which document exists, who issued it, what it covers, and notification when it changes. Compliance statements come from the manufacturer, not from us.
That is one of the most common reasons engineers contact us. Equivalence is a ladder, not a yes/no answer — some claims are backed by a matching data sheet, others only by chemistry family. We will tell you which rung a given substitution sits on before you commit to it.
Packaging sizes shown on this page are the standard units for this grade. Sample quantities for evaluation are handled case by case — tell us the trial you are planning and we will scope it with you.
Tell us what you are bonding
Substrates, process window, and the failure you are trying to design out. An engineer answers, not a form.
We do not issue compliance certificates. We supply the material, the manufacturer’s documentation, and the engineering judgement in between.