Loctite 352 UV Curable Adhesive Clear
SKU: LT01054
- Regular price
- $31.08
- Sale price
- $31.08
- Regular price
-
Detailed product description
Product Introduction
Loctite AA352 is suitable for bonding a variety of materials. After curing, it is highly resistant to vibration and impact. LOCTITE AA 352 is used to bond, seal or coat metal and glass parts in industrial applications. Typical uses include modular electrical equipment, appliance parts and decorative components.
| Manufacturer | Loctite |
| Product model # | Loctite AA352 |
| Manufacturer number | 135413 |
| Components | Single component |
| Curing method | UV curing/heating curing |
| Color appearance | Transparent |
| Cure time | UV curing: 60 s/heating curing: 30min@121℃ |
| Flashpoint | 93.3 ℃ |
| Dielectric strength | 25 kV/mm |
| Elongation at break | 290 % |
| Hardness | 60 D |
| Tensile strength | 3540 psi |
| Proportion | 1.11 |
| Viscosity | 15000 to 26000 mPa·s |
| Volume resistivity | 8 × 1012ohm-cm td> |
- Typical Environmental Resistance Test Results
- Chemical/Solvent Resistance Test Results
Spec // as published by the manufacturer
At a glance
- Product type
- Structural Adhesive
- Brand
- Loctite®
- Cure mechanism
- UV Curing
Substrates in scope
Performance focus
Values are as published by the manufacturer for this grade. They describe the product family, not a test report for your assembly — ask us for the current data sheet before you design against them.
Same family
More in Structural Adhesives
Grades we carry in the same category. Engineers most often arrive here looking for an alternative to something they already use.
Loctite 3556 Medical Grade UV Curing Adhesive Transparent
UV Curing
View grade
Loctite 366 High Vibration and Impact Resistance UV Curing Structural Adhesive Yellow
UV Curing
View grade
Loctite 383 high strength thermally conductive modified acrylic structural adhesive
Loctite®
View grade
Loctite 384 thermally conductive modified acrylic structural adhesive
Loctite®
View gradeRelated reading
Before you specify it
Technical writing from our engineering team and from the manufacturers we carry.
Knowledge Hub · 2026-08-07
How Does HMPUR Adhesive Work in TWS Earbud Assembly?
Read
Knowledge Hub · 2026-06-27
Self-healing polyurethane coating doubles corrosion resistance
Read
Knowledge Hub · 2026-06-27
What Is MS-Epoxy Hybrid Adhesive? The Dual-Cure Solution to NEV Battery Manufacturing's Toughest Challenge
ReadWhat you get with the material
We are not just shipping you a drum
A grade on its own rarely solves the problem. These are the four things we do around it.
Selection support
Tell us the substrates, the process window and the failure you are trying to avoid. We narrow the field before you order anything.
Process designPrototyping and pilot runs
Bonded samples and pilot batches of 200–500 pcs on our own dispensing and curing equipment, so process questions are answered before mass production.
Prototyping & pilotCross-border supply, DDP
Destination clearance, local labelling and destination-language SDS are set up by us. Class-restricted goods are routed at quotation time, not discovered at the border.
Cross-border supplyDocumentation chain
Which document, issued by whom, covering what, and notification when it changes. We pass manufacturer documentation through unchanged.
Material substitutionCommon questions
Before you send the enquiry
Yes. Tell us the grade and how you intend to use it, and we will send the manufacturer’s current technical data sheet. We pass manufacturer documentation through unchanged rather than reissuing it under our own name.
No — and you should be careful with anyone in our position who says they do. What we supply is the document chain: which document exists, who issued it, what it covers, and notification when it changes. Compliance statements come from the manufacturer, not from us.
That is one of the most common reasons engineers contact us. Equivalence is a ladder, not a yes/no answer — some claims are backed by a matching data sheet, others only by chemistry family. We will tell you which rung a given substitution sits on before you commit to it.
Packaging sizes shown on this page are the standard units for this grade. Sample quantities for evaluation are handled case by case — tell us the trial you are planning and we will scope it with you.
Tell us what you are bonding
Substrates, process window, and the failure you are trying to design out. An engineer answers, not a form.
We do not issue compliance certificates. We supply the material, the manufacturer’s documentation, and the engineering judgement in between.